Asus P2B-D P2B-D User Manual - Page 22
ASUS Smart Thermal Solutions - p2b manual
View all Asus P2B-D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
III. INSTALLATION ASUS Smart Thermal Solutions ASUS provides two smart solutions to Slot 1 CPU thermal problems: the ASUS Smart Fan or ASUS S-P2FAN and the ASUS P2T-Cable. ASUS S-P2FAN Thermal Sensor The optional ASUS Smart Fan or Cable CPU Fan Cable Rock Arm ASUS S-P2FAN is a CPU fan for a Pentium® II processor packaged in an SECC. Unlike other CPU thermal solutions, the ASUS S-P2FAN has an integrated thermal sensor located near the center of the CPU heat source. The sensor is optimized by ASUS to give the most accurate reading of the CPU tempera- ture, thus provides the best protection to your computer system. To Use the ASUS S-P2FAN See 2. Attach the Heatsink on the preceding page for the relevant procedures. Note that the S-P2FAN comes with a rock arm design for easy FAN/CPU installation. III. INST ALLATION CPU ASUS P2T-Cable The optional ASUS P2T-Cable can be used for a Pentium® II processor packaged in an SECC/SECC2 or a Celeron™ processor packaged in an SEPP . Sensor Sensor Connector Plug NOTE: The ASUS P2T-Cable can only be used in a Slot 1 motherboard with a 2-pin thermal sensor connector. To Use the ASUS P2T-Cable NOTE: The following procedures assume that you have properly attached a heatsink onto an SECC/SECC2/SEPP. 1. Simply peel off the tab from the sensor and then stick the sensor near the middle edge of the Intel boxed processor heatsink with fan (middle) or to either the upper or lower edge of the Celeron™ heatsink (right), as indicated. 22 ASUS P2B-D/P2B-DS User's Manual