Asus P2B-VM P2B-VM User Manual - Page 15
BIOS setting see Power Up By Keyboard in the Power Management Setup
View all Asus P2B-VM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
III. INSTALLATION 3. Real Time Clock (RTC) RAM (CLRTC) The CMOS RAM is powered by the onboard button cell battery. To clear the RTC data: (1) Unplug your computer, (2) Short solder points, (3) Turn on your computer, (4) Hold down during bootup and enter BIOS setup to reenter user preferences. RTC RAM CLRTC Clear CMOS [short solder points momentarily] III. INSTALLATION Jumpers R P2B-VM Clear RTC RAM CLRTC 4. Keyboard Power (Wake) Up (KB_WAK) This allows you to disable or enable the keyboard power up function. Set this jumper to Enable if you wish to use your keyboard (by pressing the spacebar) to power up your computer. This feature requires an ATX power supply that can supply at least 300mAmp on the +5VSB lead. The default is set to Disable because not all computers have the appropriate ATX power supply. Your computer will not power on if you set this to Enable and if you do not have the right ATX power supply. WARNING! This jumper setting must coincide with the BIOS setting (see "Power Up By Keyboard" in the Power Management Setup of the BIOS SOFTWARE) or else conflicts will occur. Setting KB WAK Disable [1-2] (default) Enable [2-3] KB_WAK 1 2 3 Disable (Default) KB_WAK 1 2 3 Enable R P2B-VM Keyboard Power (Wake) Up ASUS P2B-VM User's Manual 15