Asus P3-P5G43 User Manual - Page 36
Front panel audio connector 10-1 pin AAFP, Chassis intrusion connector 4-1 pin CHASSIS
View all Asus P3-P5G43 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
7. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default , the pin labeled "Chassis Signal" and " Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. CHASSIS R +5VSB_MB Chassis Signal GND Intrusion Connector (Default) 8. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC'97 audio standard. AAFP HD-audio-compliant pin definition Legacy AC'97 compliant definition GND PRESENSE# SENSE1_RETUR SENSE2_RETUR AGND NC NC NC R MIC2 MICPWR Line out_R NC Line out_L PORT1L PORT1R PORT2R SEBSE_SEND PORT2L Front Panel Audio Connector • We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard's high-definition audio capability. • By default, this connector is set to HD Audio. If you want to connect a High Definition front panel audio module to this connector, set the Front Panel Support Type item in the BIOS to [HD Audio]. See section "4.4.3 Chipset" for details. 3-10 Chapter 3: Motherboard info