Asus P3C-D P3C-D User Manual - Page 43
ASUS P3C-D User's Manual, Wake-On-LAN Connector 3-pin WOL_CON, Wake-On-LAN, Wake-On-Ring Connector 2
View all Asus P3C-D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
3. H/W SETUP Connectors 3. HARDWARE SETUP 12) Wake-On-LAN Connector (3-pin WOL_CON) The WOL_CON connector powers up the system when a wake-up packet or signal is received from the network through the ASUS PCI-L101 LAN card. IMPORTANT: This feature requires that Wake-On-LAN is set to Enabled (see 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power. IMPORTANT: Requires an ATX power supply with at least 720mA +5 volt standby power +5 Volt Standby PME P3C-D Ground WOL_CON P3C-D Wake-On-LAN Connector 13) Wake-On-Ring Connector (2-pin WOR) This connector connects to an internal modem card with a Wake-On-Ring output. The connector powers up the system when a ringup packet or signal is received through the internal modem card. NOTE: For external modems, WakeOn-Ring is detected through the COM port. IMPORTANT: This feature requires that PWR Up On Modem Act is set to Enabled (see 4.5.1 Power Up Control). WOR P3C-D Ring# Ground 2 1 P3C-D Wake-On-Ring Connector ASUS P3C-D User's Manual 43