Asus P4PE-X TE P4PE-X/TE User Manual - Page 27
lead to record a chassis intrusion event.
View all Asus P4PE-X TE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
+5VSB_MB Chassis Signal GND 2. Chassis intrusion connector (4-1 pin CHASSIS1) This lead is for a chassis designed with intrusion detection feature. This requires an external detection mechanism such as a chassis intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a high-level signal to this lead to record a chassis intrusion event. By default, the pins labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. If you wish to use the chassis intrusion detection feature, remove the jumper cap from the pins. CHASSIS1 ® P4PE-X/TE (Default) P4PE-X/TE Chassis Alarm Lead 3. Floppy disk drive connector (34-1 pin FLOPPY1) This connector supports the provided floppy drive ribbon cable. After connecting one end to the motherboard, connect the other end to the floppy drive. (Pin 5 is removed to prevent incorrect insertion when using ribbon cables with pin 5 plug). FLOPPY1 ® P4PE-X/TE NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. PIN 1 P4PE-X/TE Floppy Disk Drive Connector ASUS P4PE-X/TE motherboard user guide 1-17