Asus P4PE-X TE P4PE-X/TE User Manual - Page 30
USB header 10-1 pin USB_56, CPU and chassis fan connectors 3-pin CPU_FAN1, CHA_FAN1 - te driver
View all Asus P4PE-X TE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
8. CPU and chassis fan connectors (3-pin CPU_FAN1, CHA_FAN1) The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. Do not forget to connect the fan cables to the fan connectors. Lack of sufficient air flow within the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors! ® P4PE-X/TE GND +12V Rotation CPU_FAN1 CHA_FAN1 Rotation +12V GND P4PE-X/TE 12-Volt Fan Connectors 9. USB header (10-1 pin USB_56) If the USB ports on the rear panel are inadequate, a USB header is available for additional USB ports. The USB header complies with USB 2.0 specification that supports up to 480 Mbps connection speed. This speed advantage over the conventional 12 Mbps on USB 1.1 allows faster Internet connection, interactive gaming, and simultaneous running of high-speed peripherals. You may connect an optional USB 2.0/GAME module, connect the USB cable to this header. The module has two USB 2.0 ports that support the next generation USB peripherals such as high resolution cameras, scanners, and printers. 1. The USB2.0/GAME module is purchased separately. 2. Make sure to install the USB driver before using USB devices. ® P4PE-X/TE USB+5V LP5LP5+ GND NC P4PE-X/TE USB 2.0 Header USB_56 1 USB+5V LP4LP4+ GND 1-20 Chapter 1: Product introduction