Asus P4S133 Motherboard DIY Troubleshooting Guide - Page 38
Hardware information, USB Device Wake-Up 3x3 pin USBV1, USBV2, USBV3
View all Asus P4S133 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
5) USB Device Wake-Up (3x3 pin USBV1, USBV2, USBV3) The default setting, [1-2] (+5V) disables the USB wake-up feature. Reset these jumpers to pins [2-3] (+5VSB) to wake up the computer using USB devices. The USB device wake-up feature requires a power supply that can provide at least 1A on the +5VSB lead. If this requirement is not met, the system does not power up. The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode. USBV1 2 1 +5V (Default) 3 2 +5VSB USBV2 P4S133 USBV3 ® 12 23 P4S133 USB Device Wake Up +5V (Default) +5VSB 26 Chapter 2: Hardware information
26
Chapter 2: Hardware information
5)
USB Device Wake-Up (3x3 pin USBV1, USBV2, USBV3)
The default setting, [1-2] (+5V) disables the USB wake-up feature.
Reset these jumpers to pins [2-3] (+5VSB) to wake up the computer
using USB devices.
The USB device wake-up feature requires a power supply that can
provide at least 1A on the +5VSB lead. If this requirement is not met,
the system does not power up. The total current consumed must NOT
exceed the power supply capability (+5VSB) whether under normal
condition or in sleep mode.
P4S133
P4S133 USB Device Wake Up
USBV1
USBV2
+5V
12
+5VSB
23
(Default)
+5VSB
2
3
+5V
1
2
(Default)
USBV3