Asus P4SGL-MX P4SGL-MX User Manual - Page 18
Expansion slots, System memory - motherboard driver
View all Asus P4SGL-MX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
1.7 System memory The motherboard has two Double Data Rate (DDR) DIMM sockets that supports up to 2GB non-ECC PC2100/1600 DDR. A DDR DIMM has the same physical dimensions as an SDR DIMM, but it has a 184-pin footprint compared to the 168-pin of the SDR DIMM. Also, a DDR DIMM is single notched while an SDR DIMM is double notched. P4SGL-MX 104 Pins 80 Pins ® P4SGL-MX 184-Pin DDR DIMM Sockets 1.8 Expansion slots The P4SGL-MX motherboard has three (3) expansion slots. The following subsections describe the slots and the expansion cards that they support. 1.8.1 Configuring an expansion card After physically installing the expansion card, configure the card by adjusting the software settings. 1. Turn on the system and change the necessary BIOS settings, if any. 2. Assign an IRQ to the card. Refer to the tables below. 3. Install the software drivers for the expansion card. 1-8 Chapter 1: Motherboard Information