Asus P4V800D-X Motherboard DIY Troubleshooting Guide - Page 29
Serial ATA connectors 7-pin SATA1, SATA2, CPU, power and chassis fan connectors 3-pin CPU_FAN,
View all Asus P4V800D-X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
3. Serial ATA connectors (7-pin SATA1, SATA2) These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives. SATA2 GND RSATA_TXP2 RSATA_TXN2 GND RSATA_RXP2 RSATA_RXN2 GND P4V800D-X ® SATA1 GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXP1 RSATA_RXN1 GND P4V800D-X SATA connectors Important notes on Serial ATA • You must install Windows® 2000 SP4, Windows® XP SP1, Windows® 2003, or newer OS versions before using Serial ATA hard disk drives. • The Serial ATA interface is not supported when using Windows® 98SE/Me operating system. 4. CPU, power and chassis fan connectors (3-pin CPU_FAN, PWR_FAN, CHA_FAN) The fan connectors support cooling fans of 350 mA~740 mA (8.88 W max.) or a total of 1 A~2.22 A (26.64 W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! P4V800D-X CPU_FAN GND +12V Rotation ® PWR_FAN CHA_FAN GND +12V Rotation GND +12V Rotation P4V800D-X Fan connectors ASUS P4V800D-X Motherboard 1-19