Asus P5B Premium Motherboard Installation Guide - Page 168
重建鏡像硬碟
View all Asus P5B Premium manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
RAID 1 Y N> 鍵。 1. 在 JMB363 RAID BIOS Rebuild Mirror Drive Enter> 鍵。 [Main Menu] Create RAID Disk Drive Delete RAID Disk Drive Revert HDD to Non-RAID Solve Mirror Conflict Rebuild Mirror Drive Save and Exit Setup Exit Without Saving 2. 使用
華碩 P5B Premium Series 主機板使用手冊
´-´´
請依照下列步驟來重建鏡像硬碟:
1. 在 JMB363 RAID BIOS 主選單中,請使用上下方向鍵選擇 Rebuild Mirror
Drive,並按下 <Enter> 鍵。
[Main Menu]
Create RAID Disk Drive
Delete RAID Disk Drive
Revert HDD to Non-RAID
Solve Mirror Conflict
Rebuild Mirror Drive
Save and Exit Setup
Exit Without Saving
重建鏡像硬碟
當設定為 RAID 1 (鏡像) 模式的一顆硬碟從系統中拔除接著重新裝回,一
個診斷視窗便會出現詢問您是否要重建鏡像硬碟。請按下 <Y> 鍵加以確認,
否則請按下 <N> 鍵。
本選項可以讓您重建鏡像硬碟並同步兩顆硬碟中的資料。
2. 使用 <TAB> 鍵,切換到 RAID Disk Drive List 選單並選擇您想要重建的
RAID 設定>。接著請按下 <Del> 鍵來重建鏡像陣列設定。
接著下在畫面下方便會出現狀態列顯示重建陣列的進度。
JMicron Technology Corp. PCI-to-SATA II/IDE RAID Controller BIOS v0.97
[Hard Disk Drive List]
Model Name
Capacity Type/Status
HDD0: HDS722516VLSA80 164 GB
RAID Inside
HDD1: HDS722516DLA380 164 GB
RAID Inside
[RAID Disk Drive List]
Model Name
RAID Level
Capacity
Status
Members(HDDx)
RDD0: JRAID
1-Mirror
XXX GB
Rebuild
01
[Main Menu]
Create RAID Disk Drive
Delete RAID Disk Drive
Revert HDD to Non-RAID
Solve Mirror Conflict
Rebuild Mirror Drive
Save and Exit Setup
Exit Without Saving
Rebuilding... 01%, please wait...
儲存設定值與退出設定選單
當您設定完成後,請使用上下方向鍵選擇 Save & Exit Setup 接著按下
<Enter> 鍵來儲存目前的陣列設定並退出 JMB363 RAID BIOS 公用程式。
接著一個對話框會出現要求確認,請按下 <Y> 鍵加以確認,否則請按下
<N> 鍵來重回 JMB RAID BIOS 主選單。