Asus P5E64 WS Pro Motherboard Installation Guide - Page 150
Creating a RAID 0 set striped
View all Asus P5E64 WS Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Creating a RAID 0 set (striped) To create a RAID 0 set: 1. From the utility main menu, select 1. Create RAID Volume, then press . This screen appears. Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5 Copyright(C) 2003-05 Intel Corporation. All Rights Reserved. [ CREATE ARRAY MENU ] Name: RAID Level: Disks: Strip Size: Capacity: Volume0 RAID0(Stripe) Select Disks 128KB 0.0 GB Create Volume [ DISK/VOLUME INFORMATION ] Enter a string between 1 and 16 characters in length that can be used to uniquely identify the RAID volume. This name is case sensitive and cannot contain special characters. [↑↓]-Change [TAB]-Next [ESC]-Previous Menu [Enter]-Select 2. Enter a name for the RAID 0 set, then press . 3. When the RAID Level item is highlighted, press the up/down arrow key to select RAID 0(Stripe), then press . 4. When the Disks item is highlighted, press to select the hard disk drives to configure as RAID. This pop‑up screen appears. Port Drive Model 0 XXXXXXXXXXXX 1 XXXXXXXXXXXX 2 XXXXXXXXXXXX 3 XXXXXXXXXXXX [ SELECT DISKS ] Serial # XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX Size Status XX.XGB Non-RAID Disk XX.XGB Non-RAID Disk XX.XGB Non-RAID Disk XX.XGB Non-RAID Disk Select 2 to 4 disks to use in creating the volume. [↑↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete 5. Use the up/down arrow key to highlight a drive, then press to select. A small triangle marks the selected drive. Press after completing your selection. 5-36 Chapter 5: Software support