Asus P5E64 WS Pro Motherboard Installation Guide - Page 88
CPU Ratio Setting [Auto], FSB Strap to North Bridge [Auto]
View all Asus P5E64 WS Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
The configuration options for the following sub-item vary depending on the DIMMs you install on the motherboard. eXtreme Memory Profile [Disabled] This item appears only when you set the Ai Overclock Tuner item to [X.M.P.]. Allows you to select the X.M.P. mode supported by your Memory module. Configuration options: [Disabled] [Profile #1] [Profile #2] To obtain the best performance of the X.M.P. 1800/1600 DIMM, install only one DIMM on each memory channel. Refer to the table below for X.M.P. DIMM installation recommendation. X.M.P. DIMM Installation Recommendation X.M.P. DIMM Frequency DIMM_A1 Sockets DIMM_B1 DIMM_A2 DIMM_B2 1800 MHz √ √ 1800 MHz √ √ - 1600 MHz √ √ 1600 MHz √ √ - 4.4.2 CPU Ratio Setting [Auto] This item allows you to set the ratio between CPU Core Clock and FSB Frequency. The value is adjusted by typing the desired values using the numeric keypad and press the key. You can also use the and keys to adjust the value. To restore the default setting, type [auto] using the keyboard and press the key. If an invalid ratio is set in CMOS, then actual and setpoint values may differ. 4.4.3 FSB Strap to North Bridge [Auto] When set to [Auto], the FSB Strap will be adjusted automatically by FSB Frequency and DRAM Frequency. Congifuration options: [Auto] [200MHz] [266MHz] [333MHz] [400MHz] The following two items (FSB Frequency and PCIE Freuency) on the next page appear only when you set the Ai Overclock Tuner item to [Manual]. 4-18 Chapter 4: BIOS setup