Asus P5G41T-M LX2 User Manual - Page 22
P5G41T-M LX2/GB/LPT Floppy disk drive connector - gb specifications
View all Asus P5G41T-M LX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
6. USB connectors (10-1 pin USB56, USB78) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480Mbps connection speed. USB+5V USB_P8USB_P8+ GND NC USB+5V USB_P6USB_P6+ GND NC P5G41T-M LX2/GB/LPT USB56 PIN 1 USB78 PIN 1 USB+5V USB_P7USB_P7+ GND USB+5V USB_P5USB_P5+ GND P5G41T-M LX2/GB/LPT USB2.0 connectors Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! The USB 2.0 module is purchased separately. 7. Floppy disk drive connector (34-1 pin FLOPPY) This connector is for the floppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk drive. • Pin 5 on the connector is removed to prevent incorrect cable connection when using a FDD cable with a covered Pin 5. • The floppy disk drive signal cable is purchased separately. • The Floppy disk drive connector is an optional item for P5G41T-M LX2 and P5G41T-M LX2/GB. FLOPPY P5G41T-M LX2/GB/LPT PIN 1 NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. P5G41T-M LX2/GB/LPT Floppy disk drive connector 1-13 ASUS P5G41T-M LX2 Series