Asus P5GC-MX Produzida no Brasil P5GC-MX users manual Simplified Chinese - Page 63
USB Mass Storage Reset Delay [20 Sec]
View all Asus P5GC-MX Produzida no Brasil manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
USB Function [Enabled] USB Disabled] [Enabled]。 Legacy USB Support [Auto] USB Auto USB USB Disabled USB USB Disabled] [Enabled] [Auto]。 USB 2.0 Controller [Enabled] USB 2.0 Diabled] [Enabled] 。 USB 2.0 Controller Mode [HiSpeed] USB 2.0 HiSpeed(480 Mbps)或 Full Speed(12 Mbps Full Speed] [HiSpeed]。 BIOS EHCI Hand-off [Enabled] EHCI hand-off Disabled] [Enabled]。 USB USB Mass Storage Device Configuration) USB Mass storage Device Configuration USB Mass Storage Reset Delay [20 Sec] Device #1 Netac Emulation Type [Auto] USB Mass Storage Reset Delay [20 Sec] USB 10 Sec] [20 Sec] [30 Sec] [40 Sec]。 Emulation Type [Auto] USB Auto 530MB 的 USB Auto] [Floppy] [Forced FDD] [Hard Disk] [CDROM]。 華碩 P5GC-MX 2-19
±-1¸
華碩 P5GC-MX 主板用戶手冊
USB Function [Enabled]
本項目用來啟動或關閉 USB 功能。設置值有:[Disabled] [Enabled]。
Legacy USB Support [Auto]
本項目用來啟動或關閉支持 USB 設備功能。當設置為缺省值 [Auto] 時,
系統可以在開機時便自動檢測是否有 USB 設備存在,若是,則啟動 USB 控
制器;反之則不會啟動。但是若您將本項目設置為 [Disabled] 時,那麼無論
是否存在 USB 設備,系統內的 USB 控制器都處於關閉狀態。設置值有:
[Disabled] [Enabled] [Auto]。
USB 2.0 Controller [Enabled]
本項目用來啟動或關閉 USB 2.0 控制器。設置值有:[Diabled] [Enabled]
。
USB 2.0 Controller Mode [HiSpeed]
本項目可讓您將 USB 2.0 控制器設置處於 HiSpeed(480 Mbps)或 Full
Speed(12 Mbps)。設置值有:[Full Speed] [HiSpeed]。
BIOS EHCI Hand-off [Enabled]
本項目可讓您開啟當操作系統沒有 EHCI hand-off 功能時,針對該功能的
支持。設置值有:[Disabled] [Enabled]。
USB Mass storage Device Configuration
USB Mass Storage Reset Delay
[20 Sec]
Device #1
Netac
Emulation Type
[Auto]
USB 大容量儲存設備設置(USB Mass Storage Device
Configuration)
USB Mass Storage Reset Delay [20 Sec]
本項目用來設置 USB 大容量儲存設備在延遲幾秒後會自動重新開機。設
置值有:[10 Sec] [20 Sec] [30 Sec] [40 Sec]。
Emulation Type [Auto]
本項目用來設置
USB
大容量儲存設備的用途類型。設置
為 [Auto],容量少於 530MB 的 USB 設備會先被視為軟驅,其他
的會被視為硬盤設備,並且強制軟驅選項可以硬盤的方式格式化,
並在開機時被視為軟驅。設置值有:[Auto] [Floppy] [Forced FDD]
[Hard Disk] [CDROM]。