Asus P5GD2-X P5GD2-X User's Manual for English Edition - Page 44
with a jumper cap. Remove the jumper caps only when you intend
View all Asus P5GD2-X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
8 . Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC'97 audio standard. GND PRESENCE# SENSE1_RETUR SENSE2_RETUR Azalia-compliant pin definition Legacy AC'97-compliant pin definition P5GD2-X AGND NC NC NC ® AAFP MIC2 MICPWR Line out_R NC Line out_L PORT1 L PORT1 R PORT2 R SENSE_SEND PORT2 L P5GD2-X Analog front panel connector It is recommended that you connect a high-definition front panel audio module to this connector to avail of the motherboard's high-definition audio capability. 9 . Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pins labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. P5GD2-X +5VSB_MB Chassis Signal GND CHASSIS ® (Default) P5GD2-X Chassis intrusion connector 1-32 Chapter 1: Product introduction