Asus P5LD2-X 1333 User Manual - Page 35
System memory
View all Asus P5LD2-X 1333 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
2.4 System memory 2.4.1 Overview The motherboard comes with two Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets. The figure illustrates the location of the DDR2 DIMM sockets: DIMM_A1 DIMM_B1 112 Pins 128 Pins P5LD2-X/1333 P5LD2-X/1333.240-pin.DDR2.DIMM.Sockets Channel Channel A Channel B Sockets DIMM_A1 DIMM_B1 2.4.2 Memory configurations You may install 128 MB, 256 MB, 512 MB and 1 GB unbuffered non-ECC DDR2 DIMMs into the DIMM sockets. • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. • Always install DIMMs with the same CAS latency. For optimum compatibility, it is recommended that you obtain memory modules from the same vendor. Refer to the DDR2 Qualified Vendors List on the next page for details. • If you install two 1 memory modules, the system may only recognize less than 2GB because the address space is reserved for other critical functions. This limitation appears on Windows® XP 32-bit operation system which does not support Physical Address Extension (PAE). • If you install Windows® XP 32-bit operation system, a total memory of less than 2GB is recommended. • This motherboard does not support memory modules made up of 128 Mb chips or double sided x16 memory modules. ASUS P5LD2-X/1333 2-13