Asus P5LD2 P5LD2 English Edition User's Manual - Page 43
P5LD2 USB device wake-up, P5LD2 Keyboard power setting
View all Asus P5LD2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
2. USB device wake-up jumpers (3-pin USBPW12, USBPW34, USBPW56, USBPW78) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU, DRAM in slow refresh, power supply in reduced power mode). The USBPWR12 and USBPWR34 jumpers are for the rear USB ports. The USBPWR56 and USBPWR78 jumpers are for the internal USB connectors that you can connect to additional USB ports. USBPW34 USBPW12 12 23 P5LD2 +5V +5VSB (Default) USBPW56 ® USBPW78 12 23 P5LD2 USB device wake-up +5V +5VSB (Default) • The USB device wake-up feature requires a power supply that can provide 500mA on the +5VSB lead for each USB port; otherwise, the system would not power up. • The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode. 3. Keyboard power (3-pin KBPWR) This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. KBPWR 12 23 +5V +5VSB (Default) P5LD2 ® P5LD2 Keyboard power setting ASUS P5LD2 2-21