Asus P5N7A-VM User Manual - Page 72

Jumperfree Configuration, CPU TM Function [Enabled], Execute-Disable Bit Capability [Enabled] - overclocking

Page 72 highlights

CPU TM Function [Enabled] Enables or disables Intel® CPU Thermal Monitor (TM) function, a CPU overheating protection function. When enabled, the CPU core frequency and voltage are reduced when the CPU overheats. Configuration options: [Disabled] [Enabled] Execute-Disable Bit Capability [Enabled] Allows you to enable or disable Intel® Execute Disable Bit Capability. This function enhance protection of your computer, reducing exposure to viruses and malicious buffer overflow attacks when working with its supporting software and system. Configuration options: [Disabled] [Enabled] The following item appears only when you installed an Intel® Pentium® 4 or later CPU that supports the Enhanced Intel SpeedStep® Technology (EIST). Intel(R) SpeedStep(TM) Tech [Disabled] Allows you to use the Enhanced Intel® SpeedStepTM Technology. When set to [Enabled], you can adjust the system power settings in the operating system to use the EIST feature. Set this item to [Disabled] if you do not want to use the EIST. Configuration options: [Enabled] [Disabled] 2.4.2 Jumperfree Configuration Advanced Configure System Frequency/Voltage Current FSB Speed Current Memory Speed Target Memory Speed System Clock Mode 1067MHz 800MHz 800MHz [Auto] iGPU OvereClock Mode [Auto] Memory Over voltage Chipset Over voltage CPU Voltage [Auto] [Auto] [Auto] Memory Timings [Auto] [Auto] Set FSB & Memor clock automatically. [Linked] Allows Memory and FSB to overclock proportionally. [Unlink] Enter FSB and Memory clock manually. [Profiled] Set FSB and System Clock Mode [Auto] Allows you to select the system clock mode. Configuration options: [Auto] [Linked] [Unlinked] [Profiled] 2-20 Chapter 2: BIOS setup

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112

2-20
Chapter 2: BIOS setup
CPU TM Function [Enabled]
Enables or disables Intel
®
CPU Thermal Monitor (TM) function, a CPU overheating
protection function. When enabled, the CPU core frequency and voltage are
reduced when the CPU overheats. Configuration options: [Disabled] [Enabled]
Execute-Disable Bit Capability [Enabled]
Allows you to enable or disable Intel
®
Execute Disable Bit Capability. This function
enhance protection of your computer, reducing exposure to viruses and malicious
buffer overflow attacks when working with its supporting software and system.
Configuration options: [Disabled] [Enabled]
Intel(R) SpeedStep(TM) Tech [Disabled]
Allows you to use the Enhanced Intel
®
SpeedStep
TM
Technology. When set to
[Enabled], you can adjust the system power settings in the operating system to
use the EIST feature. Set this item to [Disabled] if you do not want to use the EIST.
Configuration options: [Enabled] [Disabled]
The following item appears only when you installed an Intel
®
Pentium
®
4 or later
CPU that supports the Enhanced Intel SpeedStep
®
Technology (EIST).
Advanced
Configure System Frequency/Voltage
Current FSB Speed
1067MHz
Current Memory Speed
800MHz
Target Memory Speed
800MHz
System Clock Mode
[Auto]
iGPU OvereClock Mode
[Auto]
Memory Over voltage
[Auto]
Chipset Over voltage
[Auto]
CPU Voltage
[Auto]
Memory Timings
[Auto]
2.4.2
Jumperfree Configuration
[Auto] Set FSB & Memor
clock automatically.
[Linked] Allows Memory
and FSB to overclock
proportionally.
[Unlink] Enter FSB and
Memory clock manually.
[Profiled] Set FSB and
System Clock Mode [Auto]
Allows you to select the system clock mode. Configuration options: [Auto] [Linked]
[Unlinked] [Profiled]