Asus P5Q PRO User Manual - Page 58
This connector is for an additional Sony/Philips Digital Interface S/PDIF
UPC - 610839162642
View all Asus P5Q PRO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
10. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default , the pin labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. 11. Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s). The S/PDIF Out cable are purchased separately. 2-32 Chapter 2: Hardware information