Asus P5Q Premium User Manual - Page 158
SteelVine Manager main screen, Using SteelVine Manager
UPC - 610839163137
View all Asus P5Q Premium manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
SteelVine Manager main screen Show drives connected Show drives connected to the SATA_E12 ports to the SATA_E34 ports Configure box Drive Information Capacity Information Volume Information Drive Status Current setting Using SteelVine Manager To use SteelVine Manager to create a disk array set 1. In the SteelVine Manager main screen, select the drives connected to the SATA_E12 or SATA_E34 ports, and click Configure box. The Basic Configuration Wizard appears. 2. Choose a drive mode to configure from Storage Policy, and click Apply. The system takes about 10 seconds for the change to take effect. 3. Restart the computer. • It is recommended using two new hard disks for this setup. • All original data of the hard disks connected to the SATA_E2 (white, port 1) and SATA_E4 (white, port 3) connectors on the motherboard will be erased for the EZ Backup setup. Make necessary backup before the setup. • All original data of the two / four hard disks will be erased for the Super Speed setup. Make necessary backup before the setup. 4-40 Chapter 4: Software support