Asus P5VD2 VM P5VD2-VM English Edition User's Manual - Page 45
ATX power connectors 24-pin EATXPWR, pin ATX12V, Serial port connector 10-1 pin COM2 - se pin connectors
UPC - 610839148318
View all Asus P5VD2 VM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
7. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) These connectors are for an ATX power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. • Do not forget to connect the 4-pin ATX +12 V power plug; otherwise, the system will not boot up. • Use a PSU with a minimum power rating of 300 W on this motherboard. Use of a PSU with a higher power output is recommended when configuring a system with more power‑consuming devices. The system may become unstable or may not boot up if the power is inadequate. ATX12V EATXPWR GND +12V DC ® ATX power connectors GND +12V DC +3 Volts -12 Volts Ground PSON# Ground Ground Ground -5 Volts +5 Volts +5 Volts +5 Volts Ground +3 Volts +3 Volts Ground +5 Volts Ground +5 Volts Ground Power OK +5V Standby +12 Volts +12 Volts +3 Volts 8. Serial port connector (10-1 pin COM2) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. COM2 ® PIN 1 COM port connector The Serial (COM) port module is purchased separately. ASUS P5VD2-VM/P5V-VM SE DH 1-33