Asus P5WDG2-WS P5WDG2-WS User's Manual for English Edition - Page 63
removed or replaced. The signal is then generated as a chassis
View all Asus P5WDG2-WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
P5WDG2-WS ® +5V J1B1 J1CX GND GND J1CY J1B2 +5V +5V J2B1 J2CX MIDI_OUT J2CY J2B2 MIDI_IN 9 . GAME/MIDI port connector (16-1 pin GAME) This connector is for a GAME/MIDI port. Connect the USB/GAME module cable to this connector, then install the module to a slot opening at the back of the system chassis. The GAME/MIDI port connects a joystick or game pad for playing games, and MIDI devices for playing or editing audio files. GAME P5WDG2-WS Game connector 10. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pins labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. P5WDG2-WS ® +5VSB_MB Chassis Signal GND CHASSIS (Default) P5WDG2-WS Chassis intrusion connector ASUS P5WDG2-WS 2-39