Asus P5WDG2-WS P5WDG2-WS User's Manual for English Edition - Page 65

12. Serial port connector (10-1 pin COM1) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. COM1 PIN 1 P5WDG2-WS ® P5WDG2-WS COM port connector 1 3 . ATX power connectors (24-pin EATXPWR, 2 x 4- p i n EATX12V, 4 - p i n E Z _ P L U G) These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. +12V DC +12V DC +12V DC +12V DC EATXPWR ® P5WDG2-WS EATX12V EZ_PLUG P5WDG2-WS ATX power connectors GND GND GND GND +3 Volts +12 Volts +12 Volts +5V Standby Power OK Ground +5 Volts +5V Ground EZ_DET GND +12V +5 Volts Ground +3 Volts +3 Volts Ground +5 Volts +5 Volts +5 Volts -5 Volts Ground Ground Ground PSON# Ground -12 Volts +3 Volts When installing two VGA cards using a 20-pin ATX PSU with sufficient +12V capability, we recommend that you connect the EZ Plug for better current path from +12V. Refer to the PSU documentation for dual VGA power requirements. ASUS P5WDG2-WS 2-41