Asus P7F-C SAS User Guide - Page 121

5.3.4 Managing Arrays The LSI Logic MPT Setup Utility allows you to perform other tasks related to configuring and maintaining IM and IME volumes. Refer to this section to view volume properties, manage the hot spare disk, synchronize the array, activate the array, and delete the array. Viewing volume properties To view volume properties: 1. On the main menu, select RAID Properties. LSI Logic Config Utility Adapter Properties -- SAS1068E Adapter PCI Slot PCI Address(Bus/Dev/Func) MPT Firmware Revision SAS Address NVDATA Version Status Boot Order Boot Support RAID Properties SAS Topology v6.16.00.00 (2007.05.07) SAS1068E 00 04:00:00 1.22.01.00-IR 500E0101:23456712 2B.00 Enabled 0 (Enabled BIOS & OS) Advanced Adapter Properties Esc = Exit Menu F1/Shift+1 = Help Enter = Select Item -/+ = Change Item 2. On the next screen that appears, select View Existing Array. LSI Logic Config Utility v6.16.00.00 (2007.05.07) Select New Array Type -- SAS1068E View Existing Array View the existing configuration. Create IM Volume Create IME Volume Create IS Volume Create Integrated Mirror Array of 2 disks plus up to 2 optional hot spares. Data on the primary disk may be migrated. Create Integrated Mirrored Enhanced Array of 3 to 10 disks including up to 2 optional hot spares. ALL DATA on array disks will be DELETED! Create Integrated Striping array of 2 to 10 disks. ALL DATA on array disks will be DELETED! Esc = Exit Menu F1/Shift+1 = Help Enter = Choose array type to create ASUS P7F-C Series 5-25