Home » Asus Manuals » Motherboards » Asus P8H61-I LX RM » Manual Viewer

Asus P8H61-I LX RM User Guide - Page 30

P8H61-I LX R2.0 Fan connectors, P8H61-I LX R2.0 USB2.0 connector

Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

P8H61-I LX R2.0 CPU FAN PWM CPU FAN IN CPU FAN PWR GND Rotation +12V GND 4. CPU and chassis fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. CPU_FAN CHA_FAN P8H61-I LX R2.0 Fan connectors Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! The CPU_FAN connector supports a CPU fan of maximum 2A (24 W) fan power. 5. USB connectors (10-1 pin USB56, USB78) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. P8H61-I LX R2.0 USB78 PIN 1 USB+5V USB_P7USB_P7+ GND USB+5V USB_P8USB_P8+ GND NC USB56 PIN 1 USB+5V USB_P5USB_P5+ GND USB+5V USB_P6USB_P6+ GND NC P8H61-I LX R2.0 USB2.0 connector Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! The USB module cable is purchased separately. 1-20 ASUS P8H61-I LX R2.0

Section	Page
Safety information	6
About this guide	6
P8H61-I LX R2.0 specifications summary	8
Chapter 1	11
Product introduction	11
1.1 Before you proceed	11
1.2 Motherboard overview	12
1.2.1 Placement direction	12
1.2.2 Screw holes	12
1.2.3 Motherboard layout	13
1.2.4 Layout contents	13
1.3 Central Processing Unit (CPU)	14
1.3.1 Installing the CPU	15
1.3.2 Installing the CPU heatsink and fan	17
1.4 System memory	19
1.4.1 Overview	19
1.4.2 Memory configurations	20
1.4.3 Installing a DIMM	24
1.4.4 Removing a DIMM	24
1.5 Expansion slots	25
1.5.1 Installing an expansion card	25
1.5.2 Configuring an expansion card	25
1.5.3 PCI Express 3.0/2.0 x16 slot	25
1.6 Jumpers	26
1.7 Connectors	27
1.7.1 Rear panel connectors	27
1.7.2 Internal connectors	28
1.8 Software support	33
1.8.1 Installing an operating system	33
1.8.2 Support DVD information	33
Chapter 2	35
BIOS information	35
2.1 Managing and updating your BIOS	35
2.1.1 ASUS Update utility	35
2.1.2 ASUS EZ Flash 2	36
2.1.3 ASUS CrashFree BIOS 3 utility	37
2.1.4 ASUS BIOS Updater	38
2.2 BIOS setup program	40
2.3 Main menu	44
2.3.1 System Language [English]	44
2.3.2 System Date [Day xx/xx/xxxx]	44
2.3.3 System Time [xx:xx:xx]	44
2.3.4 Security	44
2.4 Ai Tweaker menu	46
2.4.1 ASUS MultiCore Enhancement [Enabled].	46
2.4.2 Memory Frequency [Auto]	47
2.4.3 iGPU Max. Frequency [Auto]	47
2.4.4 GPU Boost [OK]	47
2.4.5 DRAM Timing Control	47
2.4.6 CPU Power Management	47
2.5 Advanced menu	49
2.5.1 CPU Configuration	49
2.5.2 PCH Configuration	51
2.5.3 SATA Configuration	52
2.5.4 System Agent Configuration	52
2.5.5 USB Configuration	53
2.5.6 Onboard Devices Configuration	53
2.5.7 APM	54
2.5.8 Network Stack	54
2.6 Monitor menu	55
2.6.1 CPU Temperature / MB Temperature [xxxºC/xxxºF]	55
2.6.2 CPU / Chassis Fan Speed [xxxx RPM] or [Ignore] / [N/A]	55
2.6.3 CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage	55
2.6.4 CPU Q-Fan Control [Enabled]	56
2.6.5 Chassis Q-Fan Control [Enabled]	56
2.6.6 Anti Surge Support [Disabled]	57
2.7 Boot menu	58
2.7.1 Bootup NumLock State [On]	58
2.7.2 Full Screen Logo [Enabled]	58
2.7.3 Wait for ‘F1’ If Error [Enabled]	58
2.7.4 Option ROM Messages [Force BIOS]	59
2.7.5 Setup Mode [EZ Mode]	59
2.7.6 UEFI/Legacy Boot [Enabled both UEFI and Legacy]	59
2.7.7 PCI ROM Priority [Legacy ROM]	59
2.7.8 Boot Option Priorities	59
2.7.9 Boot Override	59
2.8 Tools menu	60
2.8.1 ASUS EZ Flash Utility	60
2.8.2 ASUS SPD Information	60
2.8.3 ASUS O.C. Profile	60
2.9 Exit menu	61
Appendices	63