Asus P8H61-M LX3 PLUS R2.0 P8H61-M LX3 PLUS R2.0 User's Manual - Page 24

Memory configurations - memory support

Page 24 highlights

1.7.2 Memory configurations You may install 1GB, 2GB, 4GB and 8GB unbuffered non‑ECC DDR3 DIMMs into the DIMM sockets. • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. • Always install DIMMs with the same CAS latency. For optimum compatibility, we recommend that you obtain memory modules from the same vendor. • Due to the memory address limitation on 32-bit Windows® OS, when you install 4GB or more memory on the motherboard, the actual usable memory for the OS can be about 3GB or less. For effective use of memory, we recommend that you do any of the following: - Use a maximum of 3GB system memory if you are using a 32-bit Windows® OS. - Install a 64-bit Windows® OS when you want to install 4GB or more on the motherboard. • This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less. • The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value. To operate at the vendor-marked or at a higher frequency, refer to section 2.4 Ai Tweaker menu for manual memory frequency adjustment. • For system stability, use a more efficient memory cooling system to support a full memory load (2 DIMMs) or overclocking condition. P8H61-M LX3 R2.0 Series Motherboard Qualified Vendors Lists (QVL) DDR3-2400 (O.C.) MHz capability Vendors Part No. DIMM socket Size SS/DS Chip Brand Chip NO. Timing Voltage support (optional) 1DIMM 2DIMMs CORSAIR CMGTX8(XMP) 8GB(2GB x 4) SS - - 10-12-10-27 1.65V • • G.SKILL F3-19200CL11Q-16GBZHD(XMP1.3) 16GB(4GB x 4) DS - - 11-11-11-31 1.65V • • G.SKILL F3-19200CL9D-4GBPIS(XMP) 4GB(2 x 2GB) DS - - 9-11-9-28 1.65V • • GEIL GET34GB2400C9DC(XMP) 2GB DS - - 9-11-9-27 1.65V • • KINGMAX FLLE88F-C8KKAA HAIS(XMP) 2GB SS - - 10-11-10-30 1.8V • • Transcend TX2400KLU-4GK(427652)(XMP) 4GB(2 x 2GB) SS - - - 1.65V • • Transcend TX2400KLU-4GK (381850)(XMP) 4GB(2 x 2GB) SS - - 9 1.65V • • Transcend TX2400KLU-4GK(374243)(XMP) 4GB(2 x 2GB) DS - - 9 1.65V • • PATRIOT PVV34G2400C9K(XMP) 4GB(2 x 2GB) DS - - 9-11-9-27 1.65V • • DDR3 1600 MHz and higher memory frequency is supported by Intel® 3rd generation processors. 1-14 ASUS P8H61-M LX3 R2.0 Series

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

ASUS P8H61-M LX3 R2.0 Series
1-14
1.7.2
Memory configurations
You may install 1GB, 2GB, 4GB and 8GB unbuffered non-ECC DDR3 DIMMs into the DIMM
sockets.
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked or at a
higher frequency, refer to section
2.4 Ai Tweaker menu
for manual memory frequency
adjustment.
For system stability, use a more efficient memory cooling system to support a full
memory load (2 DIMMs) or overclocking condition.
You may install varying memory sizes in Channel A and Channel B. The system maps
the total size of the lower-sized channel for the dual-channel configuration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.
Always install DIMMs with the same CAS latency. For optimum compatibility, we
recommend that you obtain memory modules from the same vendor.
Due to the memory address limitation on 32-bit Windows
®
OS, when you install 4GB
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
- Use a maximum of 3GB system memory if you are using a 32-bit Windows
®
OS.
- Install a 64-bit Windows
®
OS when you want to install 4GB or more on the
motherboard.
This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less.
P8H61-M LX3 R2.0 Series Motherboard Qualified Vendors Lists (QVL)
Vendors
Part No.
Size
SS/DS
Chip
Brand
Chip NO.
Timing
Voltage
DIMM socket
support (optional)
1DIMM
2DIMMs
CORSAIR
CMGTX8(XMP)
8GB(2GB x 4)
SS
-
-
10-12-10-27
1.65V
G.SKILL
F3-19200CL11Q-16GBZHD(XMP1.3)
16GB(4GB x 4)
DS
-
-
11-11-11-31
1.65V
G.SKILL
F3-19200CL9D-4GBPIS(XMP)
4GB(2 x 2GB)
DS
-
-
9-11-9-28
1.65V
GEIL
GET34GB2400C9DC(XMP)
2GB
DS
-
-
9-11-9-27
1.65V
KINGMAX
FLLE88F-C8KKAA HAIS(XMP)
2GB
SS
-
-
10-11-10-30
1.8V
Transcend
TX2400KLU-4GK(427652)(XMP)
4GB(2 x 2GB)
SS
-
-
-
1.65V
Transcend
TX2400KLU-4GK (381850)(XMP)
4GB(2 x 2GB)
SS
-
-
9
1.65V
Transcend
TX2400KLU-4GK(374243)(XMP)
4GB(2 x 2GB)
DS
-
-
9
1.65V
PATRIOT
PVV34G2400C9K(XMP)
4GB(2 x 2GB)
DS
-
-
9-11-9-27
1.65V
DDR3-2400 (O.C.) MHz capability
DDR3 1600 MHz and higher memory frequency is supported by Intel
®
3rd generation
processors.