Asus P8Q67-M DO USB3 TPM User Manual - Page 25
P8Q67-M DO/USB3/TPM Intel, SATA 6.0Gb/s connectors
View all Asus P8Q67-M DO USB3 TPM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
7. Intel® Q67 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1/2 [gray]) These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables. GND RSATA_RXN1 RSATA_RXP1 GND RSATA_TXN1 RSATA_TXP1 GND GND RSATA_RXN2 RSATA_RXP2 GND RSATA_TXN2 RSATA_TXP2 GND P8Q67-M DO/USB3/TPM SATA6G_1 SATA6G_2 P8Q67-M DO/USB3/TPM Intel® SATA 6.0Gb/s connectors • These connectors are set to [IDE Mode] by default. In IDE mode, you can connect Serial ATA boot/data hard disk drives to these connectors. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode]. See section 2.5.5 SATA Configuration for details. • Before creating a RAID set, refer to the RAID Supplementary Guide included in the folder named Manual in the support DVD. • You must install Windows® XP Service Pack 3 or later version before using Serial ATA hard disk drives. The Serial ATA RAID feature (RAID 0, 1, 5, and 10) is available only if you are using Windows® XP SP3 or later version. • When using hot-plug and NCQ, set the SATA Mode item in the BIOS to [AHCI Mode]. See section 2.5.5 SATA Configuration for details. Chapter 1: Product introduction 1-15