Asus P8Z77-V PRO P8Z77-V PRO user's manual - Page 30

Memory configurations, P8Z77-V PRO Motherboard Qualified Vendors Lists QVL - v pro overclocking

Page 30 highlights

Chapter 2 Memory configurations You may install 1GB, 2GB, 4GB and 8GB unbuffered and non‑ECC DDR3 DIMMs into the DIMM sockets. • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. • Due to Intel 2nd Generation processors' behavior, DDR3 2200 and above/2000/1800 MHz memory module will run at DDR3 2133/1866/1600 MHz frequency as default. • According to Intel CPU spec, DIMM voltage below 1.65V is recommended to protect the CPU. • Always install DIMMs with the same CAS latency. For optimum compatibility, we recommend that you obtain memory modules from the same vendor. • Due to the memory address limitation on 32-bit Windows OS, when you install 4GB or more memory on the motherboard, the actual usable memory for the OS can be about 3GB or less. For effective use of memory, we recommend that you do any of the following: - Use a maximum of 3GB system memory if you are using a 32-bit Windows OS. - Install a 64-bit Windows OS when you want to install 4GB or more on the motherboard. For more details, refer to the Microsoft® support site at http://support.microsoft.com/kb/929605/en-us. • This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less (Memory chip capacity counts in Megabit, 8 Megabit/Mb = 1 Megabyte/MB). • The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value. To operate at the vendor-marked or at a higher frequency, refer to section 3.4 Ai Tweaker menu for manual memory frequency adjustment. • For system stability, use a more efficient memory cooling system to support a full memory load (4 DIMMs) or overclocking condition. P8Z77-V PRO Motherboard Qualified Vendors Lists (QVL) DDR3 2400 (O.C.) MHz capability Vendors Part No. Size SS/ Chip DS Brand CORSAIR CMGTX8(XMP) 8GB ( 4x 2GB ) SS - CORSAIR CMGTX8(XMP) 8GB ( 4x 2GB ) DS - G.SKILL F3-19200CL9D-4GBPIS(XMP) 4G ( 2x 2G ) DS - GEIL GOC316GB2400C10QC(XMP) 16GB ( 4x 4GB ) DS - Transcend TX2400KLU-4GK (381850)(XMP) 2GB DS - Patriot PVV34G2400C9K(XMP) 4GB ( 2x 2GB ) DS - Chip NO. Timing - 10-12-10-30 - 10-12-10-30 - 9-11-9-28 - 10-11-11-30 - - - 9-11-9-27 Voltage DIMM socket support (Optional) 1 DIMM 2 DIMM 4 DIMM 1.65 ● 1.65 ● ● 1.65 ● 1.65 ● 1.65 ● ● ● 1.66 ● * The memory modules in 2400MHz and above are supported on Intel 3rd Generation Processors by this motherboard; however, the actual frequency support varies depending on the O.C. margin of the installed CPU. 2-6 Chapter 2: Hardware information

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164

2-6
Chapter 2: Hardware information
Chapter 2
Memory configurations
You may install 1GB, 2GB, 4GB and 8GB unbuffered and non-ECC DDR3 DIMMs into the
DIMM sockets.
You may install varying memory sizes in Channel A and Channel B. The system maps
the total size of the lower-sized channel for the dual-channel configuration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.
Due to Intel 2nd Generation processors' behavior, DDR3 2200 and above/2000/1800
MHz memory module will run at DDR3 2133/1866/1600 MHz frequency as default.
According to Intel CPU spec, DIMM voltage below 1.65V is recommended to protect
the CPU.
Always install DIMMs with the same CAS latency. For optimum compatibility, we
recommend that you obtain memory modules from the same vendor.
Due to the memory address limitation on 32-bit Windows OS, when you install 4GB
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
- Use a maximum of 3GB system memory if you are using a 32-bit Windows OS.
- Install a 64-bit Windows OS when you want to install 4GB or more on the
motherboard.
For more details, refer to the Microsoft
®
support site at
This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less
(Memory chip capacity counts in Megabit, 8 Megabit/Mb = 1 Megabyte/MB).
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked
or at a higher frequency, refer to section
3.4 Ai Tweaker menu
for manual memory
frequency adjustment.
For system stability, use a more efficient memory cooling system to support a full
memory load (4 DIMMs) or overclocking condition.
P8Z77-V PRO Motherboard Qualified Vendors Lists (QVL)
DDR3 2400 (O.C.) MHz capability
* The memory modules in 2400MHz and above are supported on Intel 3rd Generation Processors by
this motherboard; however, the actual frequency support varies depending on the O.C. margin of
the installed CPU.
Vendors
Part No.
Size
SS/
DS
Chip
Brand
Chip NO.
Timing
Voltage
DIMM socket support
(Optional)
1 DIMM
2 DIMM
4 DIMM
CORSAIR
CMGTX8(XMP)
8GB ( 4x 2GB )
SS
-
-
10-12-10-30
1.65
CORSAIR
CMGTX8(XMP)
8GB ( 4x 2GB )
DS
-
-
10-12-10-30
1.65
G.SKILL
F3-19200CL9D-4GBPIS(XMP)
4G ( 2x 2G )
DS
-
-
9-11-9-28
1.65
GEIL
GOC316GB2400C10QC(XMP)
16GB ( 4x 4GB )
DS
-
-
10-11-11-30
1.65
Transcend
TX2400KLU-4GK (381850)(XMP)
2GB
DS
-
-
-
1.65
Patriot
PVV34G2400C9K(XMP)
4GB ( 2x 2GB )
DS
-
-
9-11-9-27
1.66