Asus P8Z77 WS User Guide - Page 42
Jumper, Chassis Fan control setting 3-pin CHAFAN_SEL
View all Asus P8Z77 WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
2.2.7 Jumper 1. Chassis Fan control setting (3-pin CHAFAN_SEL) These jumpers allow you to switch for fan pin selection. The CHAFAN_SEL jumper is for the front fans and rear fans control. Set to pins 1-2 when using 3-pin fans or pins 2-3 when using 4-pin fans. • If you use a 4-pin fan but set the jumper to pin 1-2, the fan you installed may not work. • If you use a 3-pin fan but set the jumper for a 4-pin fan, the fan control will not work and the fan you installed will always run at full speed. Chapter 2 2-20 Chapter 2: Hardware information
2-20
Chapter 2: Hardware information
Chapter 2
2.2.7
Jumper
1.
Chassis Fan control setting (3-pin CHAFAN_SEL)
These jumpers allow you to switch for fan pin selection. The CHAFAN_SEL jumper is for
the front fans and rear fans control. Set to pins 1–2 when using 3-pin fans or pins 2–3
when using 4-pin fans.
•
If you use a 4-pin fan but set the jumper to pin 1-2, the fan you installed may not work.
•
If you use a 3-pin fan but set the jumper for a 4-pin fan, the fan control will not work and
the fan you installed will always run at full speed.