Asus PIKE II 3108-8i 16PD User Guide - Page 32
Options, Descriptions, RAID Configuration
View all Asus PIKE II 3108-8i 16PD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Options BGI Rate CC Rate Recon. Rate Patrol Rate Cache Flush Interval Spinup Delay Spinup Drive Descriptions Use this option to select the amount of system resources dedicated to background initialization of virtual drives connected to the selected controller. The range of background initialization (BGI) rate is between 0 and 100 percent. Use this option to select the amount of system resources dedicated to consistency checks of virtual drives connected to the selected controller. The range of Consistency Check (CC) rate is between 0 and 100 percent. Use this option to select the amount of system resources dedicated to reconstruction of drives connected to the selected controller. The range of Recon rate is between 0 and100 percent. Use this option to select the rate for patrol reads for drives connected to the selected controller. The patrol read rate is the percentage of system resources dedicated to running a patrol read. The range of patrol read is between 0 to 100 percent. Use this option to control the interval at which the contents of the onboard data cache are flushed. The range of Cache Flush Interval is between 0 to100 seconds. Use this option to control the interval (in seconds) between spinup of drives connected to this controller. The delay prevents a drain on the system's power supply that would occur if all drives spun up at the same time. The range of Spinup Delay is between 0 to 255 seconds. Use this option to control the interval at which the contents of the onboard data cache are flushed. The range of Spinup Drive is between 0 to 255 seconds. Maintain PD Fail History Use this option to maintain the history of all drive failures. Enable Controller BIOS Use this option to enable or disable the BIOS for the selected controller. If the boot device is on the selected controller, the BIOS must be enabled. Otherwise, the BIOS should be disabled, or you might be unable to use a boot device elsewhere. Enable Stop CC Use this option to stop a consistency check when the controller BIOS on Error encounters an error. Auto Enhanced Import Use this option to import automatically at boot time. 2-18 Chapter 2: RAID Configuration