Asus PR-DLS PR-DLS User Manual - Page 46
Hardware information, ATX power connectors 24/20-pin ATXPWR, 8-pin ATX12V
View all Asus PR-DLS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
6. ATX power connectors (24/20-pin ATXPWR, 8-pin ATX12V) These connectors connect to an ATX 12V power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. In addition to the 24/20-pin ATXPWR connector, this motherboard requires that you connect the 8-pin ATX +12V power plug to provide sufficient power to the CPU. Make sure that your ATX 12V power supply can provide 8A on the +12V lead and at least 1A on the +5-volt standby lead (+5VSB). The minimum recommended wattage is 230W, or 300W for a fully configured system. The system may become unstable and may experience difficulty powering up if the power supply is inadequate. +3 Volts +12 Volts +12 Volts +5V Standby Power OK Ground +5 Volts Ground +5 Volts Ground +3 Volts +3 Volts 24-pin Power Connector 1 ATXPWR Ground +5 Volts +5 Volts +5 Volts -5 Volts Ground Ground Ground PSON# Ground -12 Volts +3 Volts For Power Supply with 20-pin Power Connector GND GND GND GND PR-DLS PR-DLS ATX Power Connector 8-pin CON12V 12V 12V 12V 12V 4-pin 2-20 Chapter 2: Hardware information