Asus PR-DLS PR-DLS User Manual - Page 49
ASUS PR-DLS motherboard user guide, Wake-On-LAN Connector 3-pin WOL_CON, IPMI connector 4-pin IPMI
View all Asus PR-DLS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
11. IPMI connector (4-pin IPMI) The Intelligent Platform Management Interface (IPMI) connector is for the ASMC card. Connect the 4-pin ASMC interface cable to this connector. NC IPMICLK GND IPMIDATA PR-DLS PR-DLS IPMI Connector 12. Wake-On-LAN Connector (3-pin WOL_CON) This connector supports a LAN card with a Wake-On-LAN output. The connector powers up the system when a wakeup packet or signal is received through the LAN card. IMPORTANT: Requires an ATX power supply with at least 720mA +5 volt standby power WOL_CON Ground PR-DLS PR-DLS Wake-On-LAN Connector PME +5 Volt Standby ASUS PR-DLS motherboard user guide 2-23
ASUS PR-DLS motherboard user guide
2-23
PR-DLS
PR-DLS IPMI Connector
IPMIDATA
GND
IPMICLK
NC
PR-DLS
PR-DLS Wake-On-LAN Connector
IMPORTANT:
Requires an ATX power
supply with at least 720mA +5 volt
standby power
WOL_CON
+5 Volt Standby
PME
Ground
12. Wake-On-LAN Connector (3-pin WOL_CON)
This connector supports a LAN card with a Wake-On-LAN output. The
connector powers up the system when a wakeup packet or signal is
received through the LAN card.
11. IPMI connector (4-pin IPMI)
The Intelligent Platform Management Interface (IPMI) connector is for
the ASMC card. Connect the 4-pin ASMC interface cable to this
connector.