Asus Pro H410T/CSM Pro H410T Users Manual English - Page 15

1.2.2 Rear panel connectors 1 2 3 4 5 6 7 8 1. DC power connector. Insert the power adapter into this port. • Supports both 19V and 12V DC input. • The power adapter is purchased separately. • Use the appropriate DC power adapter for the following scenarios: - Use a 90W adapter when a 35W CPU is installed on the system. - Use a 120W adapter when using your system with an LVDS panel. - Use a high-rated adapter (above 120W) when a 65W CPU is installed on the system. 2. HDMITM port. This port is for a High-Definition Multimedia Interface (HDMITM) connector, and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected content. 3. DisplayPort. This port is for DisplayPort-compatiable devices. 4 USB 3.2 Gen 1 (up to 5 Gbps) ports. These 9-pin Universal Serial Bus (USB) ports connect to USB 3.2 Gen 1 devices. 5. USB 2.0 ports. These 4-pin Universal Serial Bus (USB) ports are for USB 2.0 devices. 6 Ethernet port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub. Refer to the table on the next for the Ethernet port LED indications. Ethernet port LED indications Activity/Link LED Status Description Off No link Orange Linked Orange (Blinking) Data activity Orange (Blinking Ready to wake then steady) up from S5 mode Speed LED Status Description OFF 10Mbps connection ORANGE 100Mbps connection GREEN 1Gbps connection Activity Link Speed LED LED Ethernet port ASUS Pro H410T 1-7