Asus Pro H510M-CT/CSM Pro H510M-CT Users Manual English - Page 12

Layout contents, CPU socket, DDR4 DIMM slots, Expansion slots, Fan headers, Power connectors

Get Asus Pro H510M-CT/CSM PDF manuals and user guides View all Asus Pro H510M-CT/CSM manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

FAN PWM FAN IN FAN PWR GND GND FAN PWR FAN IN FAN PWM 1.2.1 Layout contents 1. CPU socket The motherboard comes with a LGA1200 socket designed for 11th Gen Intel® Core™ Processors & 10th Gen Intel® CoreTM, Pentium® Gold and Celeron® Processors. For more details, refer to 1.3 Central Processing Unit (CPU). 2. DDR4 DIMM slots The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR4 (Double Data Rate 4) memory modules. For more details, refer to 1.4 System memory. 3. Expansion slots This motherboard supports one PCIe 4.0/3.0 x16 graphics card and two PCIe 3.0 x1 network cards, SCSI cards and other cards that comply with the PCI Express specification. The PCI slot supports a card such as a LAN card, a SCSI card, a USB card, or any other card that complies with the PCI specifications. 4. Fan headers The Fan headers allow you to connect fans to cool the system. 5. Power connectors These Power connectors allow you to connect your motherboard to a power supply. The power supply plugs are designed to fit in only one orientation. Find the proper orientation and push down firmly until the power supply plugs are fully inserted. Ensure to connect the 8-pin power plug. • For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12V Specification 2.0 (or later version) and provides a minimum power of 350W. • We recommend that you use a PSU with a higher power output when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate. • If you are uncertain about the minimum power supply requirement for your system, we recommend you to refer to online resources for Power Supply Wattage Calculator. 6. M.2 slot (Key M) The M.2 slot allows you to install an M.2 device such as an M.2 SSD module. • The M.2 slot supports PCIe 3.0 x4 and SATA modes M Key design and type 2242/2260/2280 storage devices. • The M.2 slot shares bandwidth with the SATA6G_2 port. When a device in SATA mode is installed on the M.2 slot, the SATA6G_2 port cannot be used. 1-2 Chapter 1: Product Introduction

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
1-2
1.2.1
Layout contents
1. CPU socket
The motherboard comes with a LGA1200 socket designed for 11
th
Gen Intel
®
Core™
Processors & 10
th
Gen Intel
®
Core
TM
, Pentium
®
Gold and Celeron
®
Processors.
For more details, refer to
1.3 Central Processing Unit (CPU)
.
2. DDR4 DIMM slots
The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR4
(Double Data Rate 4) memory modules.
For more details, refer to
1.4 System memory
.
3. Expansion slots
This motherboard supports one PCIe 4.0/3.0 x16 graphics card and two PCIe 3.0 x1 network
cards, SCSI cards and other cards that comply with the PCI Express specification.
The PCI slot supports a card such as a LAN card, a SCSI card, a USB card, or any other
card that complies with the PCI specifications.
4. Fan headers
The Fan headers allow you to connect fans to cool the system.
5. Power connectors
These Power connectors allow you to connect your motherboard to a power supply. The
power supply plugs are designed to fit in only one orientation. Find the proper orientation and
push down firmly until the power supply plugs are fully inserted.
Ensure to connect the 8-pin power plug.
•
For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12V Specification 2.0 (or later version) and provides a
minimum power of 350W.
•
We recommend that you use a PSU with a higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
•
If you are uncertain about the minimum power supply requirement for your system, we
recommend you to refer to online resources for Power Supply Wattage Calculator.
6.
M.2 slot (Key M)
The M.2 slot allows you to install an M.2 device such as an M.2 SSD module.
•
The M.2 slot supports PCIe 3.0 x4 and SATA modes M Key design and type
2242/2260/2280 storage devices.
•
The M.2 slot shares bandwidth with the SATA6G_2 port. When a device in SATA
mode is installed on the M.2 slot, the SATA6G_2 port cannot be used.
FAN PWM
FAN IN
FAN PWR
GND
GND
FAN PWR
FAN IN
FAN PWM
Chapter 1: Product Introduction