Asus Pro H610M-C D4-CSM Intel 600 series Channel BIOS UM English - Page 34
CPU Core/Cache Boot Voltage, Fixed CPU Graphics Switching FrequencyKHz
View all Asus Pro H610M-C D4-CSM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
The following items appear only when using the onboard graphics. CPU Graphics Load-line Calibration The load-line is defined by the Intel VRM specification and affects the CPU Graphics power voltage. The CPU Graphics working voltage will decrease proportionally depending on the CPU Graphics loading. Higher levels of the load-line calibration can get a higher voltage and a better overclocking performance but increase the CPU Graphics and VRM thermal production. Select from level 1 to 8 to adjust the CPU Graphics power voltage from 100% to 0%. Configuration options [Auto] [Level 1] [Level 2] [Level 3] [Level 4:Recommended for OC] [Level 5] [Level 6] [Level 7] Boosted performance may vary depending on the CPU Graphics specification. DO NOT remove the thermal module. CPU Graphics VRM Switching Frequency The switching frequency will affect the CPU Graphics transient response spreed and the component thermal production. Select manual mode to configure a higher frequency to get a quicker transient response speed. Configuration options: [Auto] [Manual] DO NOT remove the thermal module when setting this item to [Manual]. The thermal conditions should be monitored. The following item appears only when CPU Graphics VRM Switching Frequency is set to [Manual]. Fixed CPU Graphics Switching Frequency(KHz) The switching frequency will affect the CPU Graphics transient response spreed and the component thermal production. Use the or to adjust the value. The values range from 250 KHz to 500 KHz with an interval of 50 KHz. Boot Voltages CPU Core/Cache Boot Voltage Allows you to set the CPU voltage at initial boot up. Configuration options: [Auto] [0.60000] - [1.70000] CPU Input Boot Voltage Allows you to set the CPU Input Voltage at initial boot up. Configuration options: [Auto] [1.50000] - [2.10000] PLL Termination Boot Voltage Allows you to set the PLL Termination voltage at initial boot up. Configuration options: [Auto] [0.80000] - [1.80000] CPU Standby Boot Voltage Allows you to set the CPU Standby voltage at initial bootup. Configuration options: [Auto] [0.80000] - [1.80000] 34 PRIME / ProArt / TUF GAMING Intel 600 Series BIOS Manual