Asus Pro H610M-C D4-CSM Pro H610M-C D4 Users Manual English - Page 9

Product Introduction 1 1.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. 1.2 • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity. • Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. Motherboard overview 5 6 1 4 2 22cm(8.7in) KBMS ATX_12V CPU_FAN DIGI+ VRM HDMI USB_56 ATX_PWR DDR4 DIMM_A1 (64bit, 288-pin module) DDR4 DIMM_B1 (64bit, 288-pin module) COM1 5 CHA_FAN 4 24.4cm(9.6in) DP VGA Place this LGA1700 U32G1_34 side towards the rear of the BATTERY 8 chassis LAN_U32G1_12 PCIE SATA 3.0 X4 X 7 M.2(SOCKET3) SATA6G_4 AUDIO 2280 2260 2242 M.2(SOCKET3) Ethernet PCIEX16(G4) 3 16 Super I/O MONO_OUT PCIEX1(G3)_1 PCIEX1(G3)_2 COM_DEBUG ASM 1083 Audio Codec AAFP COM2 PCI LPT SMBUS CLRTC 14 12 15 11 17 Intel® H610 TPM SATA6G_1 USB_78 USB_914 128Mb BIOS CHASSIS SPEAKER SATA6G_2 SATA6G_3 F_PANEL 9 7 19 13 20 10 18 Unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components. The pin definitions in this chapter are for reference only. The pin names depend on the location of the header/jumper/connector. Pro H610M-C D4 1-1