Asus R300 ASUS PND R300 QSG in English Version - Page 4
Install the Car Kit and Turn on the Device
View all Asus R300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Install the Car Kit and Turn on the Device To turn on the device, set the main power switch (at the bottom of the device) to ON. To enter into/wake up from sleep mode, press the Sleep Mode Button ( ) on the top of the device. Sleep Mode Button Note: - When the main power switch is set to Off, the device is not able to be charged. - If you press the Sleep Mode button when the device is on, it enters into sleep mode. - When the device is on, it takes longer time for the battery to be fully charged. When the device is in sleep mode, the battery can be fully charged quickly. Main power switch To install the car kit: screwcap A 1 5 1. Attached the cupula to the windshield inside your car. 2. Press the lever to secure the 2 cupula on the windshield surface. Note: Rise the lever (3) to release the cupula from the windshield. 3. Adjust the angle of the gooseneck and secure it by fastening screwcap A. 3 screwcap B 4. Adjust the angle of the cradle and secure it by fastening screwcap B. 5. Carefully place and slide the device into the cradle.