Asus ROG CROSSHAIR VI HERO CROSSHAIR VI HERO Users ManualEnglish - Page 34
Internal connectors, Serial ATA 6.0 Gb/s connectors 7-pin SATA6G_1-8 - x370 motherboard
View all Asus ROG CROSSHAIR VI HERO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
1.1.9 Internal connectors 1. AMD® Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1-8) These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, and 10 configuration through the onboard AMD® X370 chipset. Chapter 1 • These connectors are set to [AHCI] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode Selection item in the BIOS to [RAID]. • Before creating a RAID set, refer to section RAID configurations or the manual bundled in the motherboard support DVD. • When using NCQ, set the SATA Mode in the BIOS to [AHCI]. Refer to section SATA Configuration for details. 1-20 Chapter 1: Product Introduction