Asus ROG CROSSHAIR VI HERO CROSSHAIR VI HERO Users ManualEnglish - Page 80
APM Configuration, 3.6.6 Network Stack Configuration, 3.6.7 HDD/SSD SMART Information
View all Asus ROG CROSSHAIR VI HERO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
3.6.5 APM Configuration The items in this menu allow you to set system wake and sleep settings. ErP Ready [Disabled] This item allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options are switched off. Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)] Restore On AC Power Loss This item allows your system to go to ON state, OFF state, or both states after an AC power loss. When setting your system to [Last State], it goes to the previous state before the AC power loss. Configuration options: [Power Off] [Power On] [Last State] Power On By PCI-E/PCI This item allows you to enable or disable the Wake-on-LAN function of the onboard LAN controller or other installed PCI-E LAN cards. Configuration options: [Disabled] [Enabled] Power On By RTC This item allows you to enable or disable the RTC (Real-Time Clock) to generate a wake event and configure the RTC alarm date. When enabled, you can set the days, hours, minutes, or seconds to schedule an RTC alarm date. Configuration options: [Disabled] [Enabled] 3.6.6 Network Stack Configuration The items in this menu allow you to enable or disable the UEFI network stack 3.6.7 HDD/SSD SMART Information This menu displays the SMART information of the connected devices. NVM Express devices do not support SMART information. Chapter 3 3-16 Chapter 3: BIOS Setup