Asus ROG Crosshair VIII Impact Users Manual English - Page 31
Internal connectors, SATA 6Gb/s connector
View all Asus ROG Crosshair VIII Impact manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Chapter 1 1.10 Internal connectors 1. SATA 6Gb/s connector The SATA 6Gb/s connector allows you to connect SATA devices such as optical disc drives and hard disk drives via a SATA cable. If you installed SATA storage devices, you can create a RAID 0, 1, and 10 configuration through the onboard AMD X570 chipset. • These connectors are set to [AHCI] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode Selection item in the BIOS to [RAID]. • Before creating a RAID set, refer to the RAID Configuration Guide. You can download the RAID Configuration Guide from the ASUS website. ROG CROSSHAIR VIII IMPACT 1-15
ROG CROSSHAIR VIII IMPACT
1-15
Chapter 1
1.10
Internal connectors
1.
SATA 6Gb/s connector
The SATA 6Gb/s connector allows you to connect SATA devices such as optical disc
drives and hard disk drives via a SATA cable.
If you installed SATA storage devices, you can create a RAID 0, 1, and 10 configuration
through the onboard AMD X570 chipset.
•
These connectors are set to
[AHCI]
by default. If you intend to create a Serial ATA
RAID set using these connectors, set the SATA Mode Selection item in the BIOS to
[RAID]
.
•
Before creating a RAID set, refer to the
RAID Configuration Guide
. You can
download the
RAID Configuration Guide
from the ASUS website.