Asus ROG MAXIMUS XI EXTREME ROGMAXIMUSXIEXTREMEBIOSManual Users Manual English - Page 33

Channel B DIMM Control Allows you to enable or disable the Channel B DIMM slots. Configuration options: [Enable Both DIMMS] [Disable DIMM0] [Disable DIMM1] [Disable Both DIMMS] MCH Full Check Enable this item to enhance the stability of your system. Disable this item to enhance the DRAM overclocking capability. Configuration options: [Auto] [Enabled] [Disabled] Training Profile Allows you to select the DIMM training profile. Configuration options: [Auto] [Standard Profile] [User Profile] DLLBwEn Configuration options: [Auto] [1] - [7] DRAM SPD Write Configuration options: [Enabled] [Disabled] XTU Setting Configuration options: [Auto] [1] - [7] External Digi+ Power Control CPU Load-line Calibration Load-line is defined by Intel® specification and affects CPU power voltage. The CPU working voltage decreases proportionally to CPU loading. Higher load-line calibration could get higher voltage and good overclocking performance, but increases the CPU and VRM thermal conditions. Configuration options [Auto] [Level 1] - [Level 8] The actual performance boost may vary depending on your CPU specification. DO NOT remove the thermal module. The thermal conditions should be monitored. Synch ACDC Loadline with VRM Loadline Enable this item to allow the VRM Loadline to be adjusted automatically to match the AC/DC Loadline. Configuration options: [Enabled] [Disabled] CPU Current Capability This item allows you to set the shut off current limit for external voltage regulator. A higher setting will allow the voltage regulator to supply more current while a lower setting will cause the voltage regulator to shut off the system when the supplied current is higher than the set value. Configuration options: [Auto] [100%] - [140%] Configure higher values when overclocking or under a high loading for extra power support. ROG MAXIMUS XI EXTREME BIOS Manual 33