Asus ROG STRIX B250F GAMING STRIX B250F GAMING BIOS ManualEnglish - Page 21

IOAPIC 24-119 Entries [Enabled] This item allows you to enable/disable the IOAPIC 24-119 Entries. IRQ24-119 may be used by PCH devices. Disabling those interrupts may cause certain devices to fail. Configuration options: [Enabled] [Disabled] PCH Storage Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Empty if no SATA device is installed to the corresponding SATA port. Hyper Kit Mode [Disabled] Disable this option for M.2 devices. Enable this option for ASUS Hyper Kit card. Configuration options: [Disabled] [Enabled] SATA Controller(s) [Enabled] This item allows you to enable or disable the SATA device. Configuration options: [Enabled] [Disabled] Aggressive LPM Support [Disabled] This item allows you to enable or disable PCH entering link power state aggressively. Configuration options: [Disabled] [Enabled] SMART Self Test [On] SMART (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that shows a warning message during POST (Power-on Self Test) when an error occurs in the hard disks. Configuration options: [On] [Off] Hot Plug [Disabled] (SATA6G_1 (Gray) ~ SATA6G_6(Gray)) These items allow you to enable/disable SATA Hot Plug Support. Configuration options: [Disabled] [Enabled] PCH-FW Configuration TPM Device Selection [Discrete TPM] This item allows you to select the TPM device. Configuration options: [Discrete TPM] [Firmware TPM] ASUS STRIX B250F GAMING 21