Asus ROG STRIX B250H GAMING User Guide - Page 61
System Agent (SA) Configuration, 3.6.4 PCH Configuration, 3.6.7 Onboard Devices Configuration
View all Asus ROG STRIX B250H GAMING manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
CFG lock [Disabled] This item allows you to enable or disable the CFG lock. Configuration options: [Disabled] [Enabled] 3.6.3 System Agent (SA) Configuration The items in this menu allow you to adjust the Link Speed for PEG Port and Multi-Monitor. 3.6.4 PCH Configuration PCI Express Configuration This item allows you to configure the PCI Express slots. PCI-E Speed [Auto] This item allows your system to automatically select the PCI Express port speed. When set to [Gen1], the PCI-E port runs at PCI-E 1.0 speed. When set to [Gen2], the PCI-E port runs at PCI-E 2.0 speed. Configuration options: [Auto] [Gen1] [Gen2] 3.6.5 PCH Storage Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Empty if no SATA device is installed to the corresponding SATA port. SATA Controller(s) [Enabled] This item allows you to enable or disable the SATA device. Configuration options: [Enabled] [Disabled] SMART Self Test [On] SMART (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that shows a warning message during POST (Power-on Self Test) when an error occurs in the hard disks. Configuration options: [On] [Off] Hot Plug [Disabled] (SATA6G_1 (Gray) ~ SATA6G_6(Gray)) These items allow you to enable/disable SATA Hot Plug Support. Configuration options: [Disabled] [Enabled] 3.6.6 PCH-FW Configuration This item allows you to configure the firmware TPM. 3.6.7 Onboard Devices Configuration HD Audio Controller [Enabled] This item allows you to use the Azalia High Definition Audio Controller. Configuration options: [Disabled] [Enabled] Chapter 3 ASUS STRIX B250H GAMING 3-13