Asus ROG STRIX B250H GAMING User Guide - Page 65
Setup Animator, 3.9.4 ASUS SPD Information, 3.9.5 Graphics Card Information, GPU Post
View all Asus ROG STRIX B250H GAMING manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
• The time to erase the contents of your SSD may take a while depending on its size. Do not turn off the system during the process. • Secure Erase is only supported on Intel SATA port. For more information about Intel SATA ports, refer to section 1.1.2 Motherboard layout of this manual. Displays the available SSDs Chapter 3 Status definition: • Frozen. The frozen state is the result of a BIOS protective measure. The BIOS guards drives that do not have password protection by freezing them prior to booting. If the drive is frozen, a power off or hard reset of your PC must be performed to proceed with the Secure Erase. • Locked. SSDs might be locked if the Secure Erase process is either incomplete or was stopped. This may be due to a third party software that uses a different password defined by ASUS. You have to unlock the SSD in the software before proceeding with Secure Erase. 3.9.3 Setup Animator This item allows you to enable or disable the Setup animator. Configuration options: [Disabled] [Enabled] 3.9.4 ASUS SPD Information This item allows you to view the DRAM SPD information. 3.9.5 Graphics Card Information This item displays the information about the graphics card installed in your system. GPU Post This item displays the information and recommended configuration for the PCIE slots that the graphics card is installed in your system. This feature is only supported on selected ASUS graphics cards. ASUS STRIX B250H GAMING 3-17