Asus ROG STRIX Z270E GAMING STRIX Z270E GAMING Users manual ENGLISH - Page 10
ROG SupremeFX S1220A 8-Channel High Definition Audio CODEC, Z270 Chipset with RAID 0
View all Asus ROG STRIX Z270E GAMING manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
STRIX Z270E GAMING specifications summary Storage Audio Intel® Z270 Chipset with RAID 0, 1, 5, 10 and Intel Rapid Storage Technology 15 support - 6 x SATA 6Gb/s ports - 1 x M.2_1 Socket 3 with M key, type 2242/2260/2280/22110 storage devices support (both SATA & PCIE 3.0 x 4 mode)* - 1 x M.2_2 Socket 3 with M key, type 2242/2260/2280 storage devices support (PCIE 3.0 x 4 mode)** - Ready for Intel® Optane Memory*** - Supports Intel® Smart Response Technology**** * The M.2_1 socket shares SATA_1 port when use M.2 SATA mode device. Adjust BIOS settings to use a SATA device. ** The M.2_2 socket shares SATA_56 ports when use M.2 PCIE mode device in X4 mode. Adjust BIOS settings to use SATA devices. *** Intel® Optane Technology only supported when using 7th Generation Intel® Processors. Before using Intel® Optane memory modules, ensure that you have updated your motherboard drivers and BIOS to the latest version from ASUS support website. **** These functions will work depending on the CPU installed. ROG SupremeFX S1220A 8-Channel High Definition Audio CODEC - Supports up to 32-Bit/192kHz playback* - Impedance sense for front and rear headphone outputs - High quality 120dB SNR stereo playback output and 113 dB SNR recording input - SupremeFX Shielding Technology - Dual Headphone Amplifiers - Jack-detection, Multi-streaming, and Front Panel Jack-retasking - Optical S/PDIF out port at back panel Audio Features: - Sonic Radar III - Sonic Studio III USB * Due to limitations in HDA bandwidth, 32-Bit/192kHz is not supported for 8-Channel audio Intel® Z270 Chipset*: - 6 x USB 3.0 ports ( 4 ports at back panel [blue], 2 ports at mid-board) - 6 x USB 2.0 ports * * 2 x USB2.0 port at mid-board shares with ROG extension (ROG_EXT) port. ASMedia® USB 3.1 controller*: - 1 x USB 3.1 front panel connector** - 2 x USB 3.1 ports (1 x Type-A [red] and 1 x Type-C at back panel) * Supports 3A power output ** The USB 3.1 front panel connector shares bandwidth with PCIE_x1_2 and PCIE_x1_4. If the USB 3.1 front header is connected, PCIE_x1_2 and PCIE_x1_4 will be disabled. (continued on the next page) x