Asus ROG STRIX Z270E GAMING STRIX Z270E GAMING Users manual ENGLISH - Page 28
Internal connectors, Intel, Serial ATA 6 Gb/s connectors 7-pin SATA6G_12, SATA 6G_34, SATA
View all Asus ROG STRIX Z270E GAMING manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Chapter 1 1.1.8 Internal connectors 1. Intel® Serial ATA 6 Gb/s connectors (7-pin SATA6G_12, SATA 6G_34, SATA 6G_56) These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® Z270 chipset. • These connectors are set to [AHCI] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [Intel RST Premium With Intel Optane System Acceleration (RAID)]. • Before creating a RAID set, refer to the manual bundled in the motherboard support DVD. 1-12 Chapter 1: Product Introduction
1-12
Chapter 1: Product Introduction
Chapter 1
1.1.8
Internal connectors
1.
Intel
®
Serial ATA 6 Gb/s connectors (7-pin SATA6G_12, SATA 6G_34, SATA
6G_56)
These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s
signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel
®
Rapid Storage Technology through the onboard Intel
®
Z270 chipset.
•
These connectors are set to
[AHCI]
by default. If you intend to create a Serial ATA
RAID set using these connectors, set the SATA Mode item in the BIOS to
[Intel RST
Premium With Intel Optane System Acceleration (RAID)]
.
•
Before creating a RAID set, refer to the manual bundled in the motherboard support
DVD.