Asus ROG STRIX Z790-I GAMING WIFI Users Manual English - Page 37

M.2 installation, To install an M.2 to M.2_1SOCKET3 slot

Get Asus ROG STRIX Z790-I GAMING WIFI PDF manuals and user guides View all Asus ROG STRIX Z790-I GAMING WIFI manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Chapter 2 2.1.4 M.2 installation Supported M.2 type varies per motherboard. If the thermal pad on the M.2 heatsink becomes damaged, we recommend replacing it with the bundled thermal pad or a thermal pad with a thickness of 1.25mm. • Use a Phillips screwdriver when removing or installing the screws or screw stands mentioned in this section. • The M.2 is purchased separately. To install an M.2 to M.2_1(SOCKET3) slot 1. Loosen the screws from the top M.2 heatsink. 2. Lift and remove the top heatsink. 1 1 2 3. Remove the plastic film from the thermal pad on the bottom heatsink. If the thermal pad on the M.2 heatsink becomes damaged, we recommend replacing it with the bundled thermal pad or a thermal pad with a thickness of 1.25mm. 3 ROG STRIX Z790-I GAMING WIFI 2-7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
ROG STRIX Z790-I GAMING WIFI
2-7
Chapter 2
2.1.4
M.2 installation
Supported M.2 type varies per motherboard.
If the thermal pad on the M.2 heatsink becomes damaged, we recommend replacing it
with the bundled thermal pad or a thermal pad with a thickness of 1.25mm.
•
Use a Phillips screwdriver when removing or installing the screws or screw stands
mentioned in this section.
•
The M.2 is purchased separately.
1.
Loosen the screws from the top M.2 heatsink.
2.
Lift and remove the top heatsink.
To install an M.2 to M.2_1(SOCKET3) slot
3.
Remove the plastic film from the thermal pad on the bottom heatsink.
If the thermal pad on the M.2 heatsink becomes damaged, we recommend replacing it
with the bundled thermal pad or a thermal pad with a thickness of 1.25mm.
2
1
1
3