Asus RP-AC51 QSG Quick Start Guide - Page 1

Quick Start Guide RP-AC51 Wi-Fi AC Repeater E12398 / First Edition / March 2017 LED explanations POWER On: RP-AC51 is power on. Off: RP-AC51 is power off. EXISTING NETWORK On: Connected to the router/AP. Off: Not connected to the router/AP. MOVE CLOSER Need to move RP-AC51 closer to the router/AP. MOVE AWAY SLIGHTLY Need to move RP-AC51 slightly away from the router/AP. BEFORE SETUP WE SUGGEST... 01 Placing your RP-AC51 1 Place your RP-AC51 near your router/AP. 2 Check the LEDs and see the LED explanations. 02 Power On 1 Plug your RP-AC51 to a power outlet. 2 Turn on the power switch. around 2 meters SETUP METHODS 1 METHOD APP SUPPORT 01 Download the app 02 Use the app Button explanations POWER SWITCH Switch this button on/off to turn RP-AC51 on/off. WPS BUTTON Press this button to quickly connect to the router/AP via the WPS method. RESET BUTTON Use a pin to push this button to reset RP-AC51 to Reset its factory de- fault settings. Wait until the power LED turns blue, indicating that your RP-AC51 is ready to connect to your existing router/AP. 2 METHOD WPS SUPPORT 01 Connect via WPS 1 Press the WPS button on your router/AP. 2 Press the WPS button on your RP-AC51 for more than two (2) seconds until the power LED starts to blink. 1 Tap SET UP EXTENDER. 2 Open your phone Wi-Fi, and connect to your RP-AC51's SSID. 3 Follow the Quick Extender Setup instructions. 4 Assign a unique network name (SSID) for your extended network. 5 Wait until the setup is completed. 02 Enjoy Wi-Fi NOTE: Wait until the existing network LED blinks for about two (2) minutes, then turns solid blue, indicating the WPS process is completed. Your RP-AC51's wireless network name (SSID) changes to your existing Wi-Fi network name, ending with _RPT or _RPT5G and shares your router/AP's Wireless Password. E12398_RP-AC51_QSG_Special_A3.indd 1 2017-04-05 16:37:57