Asus RS120-E4 User Guide - Page 42
Use a Phillips screw driver cross
UPC - 610839641819
View all Asus RS120-E4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
9. Use a Phillips screwdriver (cross) to remove three screws that secures the drive. 10. Use a Phillips screw driver (cross) to remove two screws that secures the backplane with the drive. Then, remove the backplane from the drive. 11. Carefully slide the optical drive inward for about half an inch, then lift it out of the bay. 12. Remove the screws that secure the optical drive to its metal bracket. 2-26 Chapter 2: Hardware setup
Chapter 2:
Hardware setup
2-26
11.
Carefully slide the optical drive
inward for about half an inch, then
lift it out of the bay.
12.
Remove the screws that secure the
optical drive to its metal bracket.
9.
Use a Phillips screwdriver (cross) to
remove three screws that secures
the drive.
10.
Use a Phillips screw driver (cross)
to remove two screws that secures
the backplane with the drive. Then,
remove the backplane from the
drive.