Asus RS160-E4 User Guide - Page 107
LSI Corporation MPT Setup Utility, 6.2.1 Integrated Mirroring (IM) volume
UPC - 610839648061
View all Asus RS160-E4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
6.2 LSI Corporation MPT Setup Utility The LSI Corporation MPT Setup Utility is an integrated RAID solution that allows you to create the following RAID set(s) from SAS hard disk drives supported by the LSI1068 PCI-X SAS controller: • RAID 1 (Integrated Mirroring) • RAID 1E (Integrated Mirroring Enhanced) • RAID 0 (Integrated Striping) • You may use disks of different sized in IM and IME volumes; however, the size of the smallest disk determines the "logical" size of each member disk. • DO NOT combine Serial ATA and SAS disk drives in one volume. • The RAID setup screens shown in this section are for reference only and may not exactly match the items on your screen due to the controller version difference. 6.2.1 Integrated Mirroring (IM) volume The Integrated Mirroring (IM) feature supports simultaneous mirrored volumes with two disks (IM). The IM feature supports hot swap capability, so when a disk in an IM volume fails, you can easily restore the volume, and the swapped disk is automatically remirrored. To create an IM volume: 1. Turn on the system after installing all SAS hard disk drives. 2. During POST, press to enter the SAS configuration utility. LSI Corporation MPT SAS BIOS MPTBIOS-6.18.01.00 (2007.08.08) Copyright 2000-2007 LSI Corporation. Press Ctrl-C to start LSI Corp Configuration Utility... ASUS RS160-S5/PX4 6-3